FH Group
View Cart  |  Checkout   
WHAT'S NEW?
Smart Fit Floor Mats Trimmable for Custom Fit FM950-1
Smart Fit Floor Mats Trimmable for Custom Fit FM950-1
$49.99
$29.99
SPECIALS
Semi Custom Trimmable Vinyl Trunk Liner / Cargo Mat F16403
Semi Custom Trimmable Vinyl Trunk Liner / Cargo Mat F16403
$39.99
$26.99
Seat Cover Fitting Instructions
Car Cover Fitting Instructions
Bucket Seat Covers InstallationOne Piece Bucket Covers Installation




Split Bench Seat Covers InstallationSolid Bench Seat Covers Installation




Seat Blets AdjustmentAirbag Deployment Official Test




2012 Top Sellers



Front seat cover

1. Align the bucket cover over the seat and slide it down gently, ensure that the designs are lined up correctly. If you are not able to slide the cover on, remove headrest first (push release button).

2. Once the backrest part has been fitted, locate the straps in the center of the cover and push it through the back seat crevice and tighten the straps on the bottom of the seat.

Optional: If your front seat center crevice is blocked by a flap, you can pull up the flap by locating the strap on the bottom rear of the seat.


3. Fit the base part of the cover over seat and secure it by connecting the elastic loops underneath the seat with supplied Snaps OR you can just tuck the mesh cloth underneath the seat.

4. Reinsert headrest and cover it with headrest cover, secure headrest cover by fastening the elastic straps inside the headrest cover and close the opening with the velcro on top of the seat cover.




Front one-piece bucket cover

1. Align the bucket cover over the headrest and slide it down gently; ensure that the designs are lined up correctly.

2. Once the backrest part has been fitted, locate the straps in the center of the cover and push it through the back seat crevice.

Optional: If your front seat center crevice is blocked by a flap, you can pull up the flap by locating the strap on the bottom rear of the seat.

3. Fit the base part of the cover over seat and secure it by connecting the elastic loops underneath the seat with supplied Snaps OR you can just tuck the mesh cloth underneath the seat.




Rear bench cover/Seat (bottom) cover

1. Find the rear seat cover from the package, it is the one with the tag labeled BOTTOM located on the border inside of the cover. (It looks very similar to the backrest cover except it’s smaller in size and has 3 pieces of mesh cloth attached to it.) To lift up your bench seat, locate the control on the bench and push to yank it up.

2. Fit the cover over seat and secure it by fastening the straps on the bottom of the seats. Also fasten the elastic loops together tightly for a snug fit using the supplied snaps (this step is optional). These snaps and straps will be hidden underneath the seat. Or you can just tuck in the mesh cloth underneath the seat. The installation will be easier if you are able to lift up the seat.




Rear bench cover/backrest cover

1. Remove headrests first. If your rear headrests are not removable, then you can cut a line from the edge of the backrest cover to install the backrest cover. The material will not rip. The backrest cover is the one labeled ‘BACKREST ’ tag on the border inside the cover.

2. Fit the cover on the backrest. Push the bottom straps through seat crevice to the back and fasten the straps from the back side of the bench for a snug fit. Removing the seat or lifting it up will make it much easier to install the backrest cover. You can also connect the loops with supplied snaps (this step is optional). Or you can just tuck in the mesh cloth on the side of the seat.




To split or fold the rear bench

Based on the position of the bench split, unzip the corresponding zipper on the backrest or bottom seat cover, this will allow you to fold the bench up and down. Unzip one zipper from the bottom. We also include a set of mesh cloth with zippers to cover the exposed part.

You can unzip the zipper in the middle to allow armrest/cup holder down. Make sure to unzip from the bottom not the top of the cover.




Rear headrest cover

Fit the headrest cover over rear bench headrest. Cut two tiny holes on top of the backrest cover where the headrest needs to be inserted back. DO NOT cut anything before you are completely sure the backrest cover is aligned and fitted to your satisfaction. Stuff the material underneath the rim for a smoother look (this step is optional), then put the headrests back. Fasten the straps to secure headrest covers.




Note – Rear seat belt adjustment

Backrest: Make sure you pull out the seatbelt out first. Fit the seat cover on the backrest, make sure seatbelt is on top of the cover, not beneath the cover. Then cut a slit from the edge of the cover where the seatbelt comes out.

Seat: Ensure the rear seat covers are fitted to your satisfaction; then cut two small holes at where the belt buckles are in order to pull the belt buckles out. The material will not tear up.




Bucket Seat Armrest:

To remove armrest: the screw is located at the end of the armrest. Remove the round cap and undo the screw inside to take out the armrest. After you have installed the seat covers, redo the screw and put back the armrest.





Car Cover Fitting Instructions

Fit the cover over the front of the car, and fit the elasticized hem under the front bumper. (Front bumper side is marked by a FRONT tag which is sewn in the elasticized hem. Pull cover over top of car and secure under rear bumper.

The buckle straps are located in the bottom center of the cover; buckle the straps on the bottom of the vehicle for a more secure fit.

For cable lock users: Cover is equipped with grommet holes on both sides of the cover. Use the holes to die down the cover with a cable lock.


Antenna Patch

An antenna patch has been included with this cover for antennas that don't retract. Cover the vehicle with the car cover and mark where antenna hits the cover. Apply the adhesive-backed patch to that spot, and make a hole in the center of the patch after the patch is applied.


Storage

A storage bag is provided for your convenience. Storing a wet car cover inside the storage bag is not recommended.


Care Instructions

To clean, brush off cover with a soft cloth or wipe down with a sponge and warm water. Spot clean only. Drip dry in shade. DO NOT IRON. DO NOT MACHINE WASH AND PLACE IN DRYER.


High Winds

Be sure to secure the cover using the buckle straps provided. Do not rely solely on the elasticized bottom of the cover to provide protection from strong wind.


Warning

Do not place cover on wet vehicle.
Do not place wet cover on vehicle.
Do not use on freshly painted vehicle.
Do not cover a hot tail pipe.
Do not cover a car with convertible top down, windows or sunroof open or T –tops out, or while trailering a vehicle.
Failure to comply with the above warming may cause damage to cover and/or vehicle paint surface and will void warranty. Some states require that the license plate of the covered vehicle be clearly displayed when the vehicle is parked in a public place. Please review state laws before using.


Measurement Tips

Shopping Cart
0 items
The News
Bestsellers
01.Deluxe Leatherette seat covers PU007 115
02.Deluxe Leatherette seat covers PU007 114
03.Handstands Jelly Sticky Pad D-1006
04.Flat Cloth Seat Covers FB050 114
05.Flat Cloth Seat Covers FB051 115
06.PU Leather Bucket Seat Covers with Side Airbag ready PU002 102
07.Exquisite Leatherette Seat Covers PU005 115
08.Flat Cloth Seat Covers FB050 115
09.Deluxe 3D Air Mesh Seat Covers FB060 114
10.Deluxe 3D Air Mesh Seat Covers FB060 115
REVIEWS
Racing PU Leather Seat Covers Airbag Compatible PU003 115
I purchased the seatcovers for my new car..once installed..I ..
5 of 5 Stars!
 
© 2012 Bestfh.com All Rights Reserved | Privacy Policy